I received several requests for a closer look at the dust collection on my planer. The factory dust hood is no longer available for my particular model, so in order to capture all the chips and dust that is produced from this beast I had to create my own dust hood.
YOU CAN WATCH THE VIDEO HERE…
I basically constructed a box with a cut-out on one side to accept the dust exhaust. The top is a thin piece of MDF just to seal everything off. Other than the 3/4″ plywood and MDF, I used a 4″ self cleaning blast gate that is attached directly to the top of the box, which is very convenient. Take a look at a few images below from the video.
If you enjoyed this post you might like the videos below as they cover even more about the dust collection solutions in my shop. Take a look…
Thank you for stopping by. If you found this post useful please like it and share it. Don’t forget to sign up for our newsletter below. We send out project information, shop updates and notifications on all of our project plans when they come available. Thanks again!